Comments on: New downloads section & MOH fix coming

By: moy

moy — Thu, 06 Dec 2007 21:04:52 +0000

Yes I meant “group_i_end_of_ANI_restricted”, I just asked for some traces to a Anton Krall, he has several R2 installations with libmfcr2. I have not confirmed the issue, but users mention enabling ANI digits cause dropped calls with restricted ANI, so they either put 0 as ANI digits or have to live with some dropped calls. I will review the traces an let you know what the fix is ( at least for México variant ) so you can add the change to libmfcr2.

By: coppice.

coppice. — Thu, 06 Dec 2007 15:42:55 +0000

What do you mean by “Other people has reported problems with private callerid.”? If you means the restriction features, though can be a bit variant specific. You’ll need to check the variant in use, and we might need to clean up an entry or two in the MFC/R2 code.

By: moy

moy — Tue, 20 Nov 2007 15:20:56 +0000

There is no astunicall development team , this is software created by Steve Underwood ( www.soft-switch.org ), I just patch it a bit and put together versions that are likely to work.

Now, having said that. If you want me to help give me ssh access and contact me by messenger at ( moises dot silva at gmail dot com )

By: awerflli2

awerflli2 — Sat, 17 Nov 2007 19:49:51 +0000

Hi moy
sorry i am not sure about meaning of the number of placed calls ,but as mush as i understand , i did one sip (soft-phone ) attached to asterisk servers A ,and another soft sip for the other asterisk server B , and the call has been established via both directions with no problem,(thanks for astunicall developers team) but while there is no calls it is continuouslly showing the above message ,and this is my test i thionk it is very simple configuration files in both sides

unicall.conf
[channels]
context=default
usecallerid=yes
hidecallerid=no
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0

group=1

callgroup=1
pickupgroup=1
immediate=no
callerid=175
;loglevel=255
protocolclass=mfcr2
protocolvariant=my,3,3
protocolend=cpe
group=1
channel => 1-15
channel => 17-31

extension.conf at server A
[general]
static=yes
writeprotect=yes
[default]
exten => 180,1,Dial(Unicall/g1/180)
exten => 176,1,Dial(SIP/176)

extension.conf at server B

[general]
static=yes
writeprotect=yes
[default]
exten => 176,1,Dial(Unicall/g1/176)
exten => 180,1,Dial(SIP/180)
thanx alot

By: moy

moy — Wed, 14 Nov 2007 15:23:22 +0000

How many calls are you placing when you start to see this errors?

By: awerflli2

awerflli2 — Wed, 14 Nov 2007 14:42:25 +0000

Hi moy
first of all thanx for every thing
and as you said after disableing the selinux setting that restric
the actions for the installed software it is working probally now

in fact i am trying to to do testing for the mfcr2 configuration by
connetd two asterisk servers as master/ slave together using

astunicall-1.4.9-0.1.tar.gz
TE110P digium card2 in each server
and e1 crosscable

so for each server it semmes like it is working probally as following samples

– Registered channel 1, mfcr2 signalling ………. channel 31, mfcr2 signalling

followed by
Parsing tone set

followed by
chan_unicall.c:2589 handle_uc_event: Unicall/1 event Detected…….: Unicall/31 event Detected

chan_unicall.c:2589 handle_uc_event: Unicall/1 event Local end unblocked– Unicall/31 local unblocked

chan_unicall.c:2589 handle_uc_event: Unicall/1 event Far end unblocked …Unicall/31 event Far end unblocked

after connetcting the cable it gives some error message in master server and” i am not sure if the problem with asterisk unicall
or other thing ” it gives error and blocking and unblocking continuouslly as shown in following error samples

ERROR[2972]: chan_unicall.c:2593 handle_uc_event: Unicall/27 protocol error. Cause 32773
NOTICE[2972]: chan_unicall.c:2589 handle_uc_event: Unicall/28 event Protocol failure

chan_unicall.c:2589 handle_uc_event: Unicall/18 event Far end disconnected
chan_unicall.c:2874 handle_uc_event: CRN 32769 - far disconnected cause=Normal, unspecified cause [31]
chan_unicall.c:2589 handle_uc_event: Unicall/18 event Drop call
chan_unicall.c:2589 handle_uc_event: Unicall/2 event Release call — Unicall/2 released
chan_unicall.c:2589 handle_uc_event: Unicall/18 event Release call — Unicall/18 released

By: moy

moy — Tue, 06 Nov 2007 15:48:31 +0000

I wish I had more time to see what exactly that means. My guess is that you have SELinux enabled ( http://en.wikipedia.org/wiki/SELinux ). I am not an expert on that area, and I am not quite sure which restrictions impose, but I remember I had a similar ( if not the same ) issue in CentOS and I had to disable SELinux. Probably a less brute force solution exists. Try disabling SELinux and let us know.

By: awerflli2

awerflli2 — Tue, 06 Nov 2007 11:25:23 +0000

Hi, thanx for this great work

I am quit new using asterisk and I already ve installed the complete astunicall-1.4.9-0.1.tar on centos5 and i did not do any patch or copy to any file

but when restart the asterisk by asterisk -vvvvvgc

it seems it does not load the chan_unicall.so

even i did manully as following

*CLI> module load chan_unicall.so

[Nov 6 13:21:09] WARNING[3394]: loader.c:360 load_dynamic_module: Error loading module ‘chan_unicall.so’: /usr/lib/asterisk/modules/chan_unicall.so: cannot restore segment prot after reloc: Permission denied
[Nov 6 13:21:09] WARNING[3394]: loader.c:637 load_resource: Module ‘chan_unicall.so’ could not be loaded.

thanks in advance